TOMRA Food adds TOMRA 4A three-way optical sorter for potatoes into storage

By Potatopedia Editorial desk ·

TOMRA Food has added the TOMRA 4A to its potato range. The AI-based optical sorter splits one incoming flow into good potatoes, out-of-spec tubers and foreign material. TOMRA says it handles up to 100 tons an hour going into storage with one operator, and gives 92% foreign-material accuracy from internal tests.

Why it matters

Soil, stones and rotting tubers that go into store raise shrink and disease risk for the whole pile, so sorting before storage protects the raw material processors draw on for months. A separate stream for out-of-spec potatoes lets growers sell them for processing, feed or biogas instead of mixing them with waste, and one-operator lines answer the shortage of farm labor.

TOMRA Food lists a new optical potato sorter, the TOMRA 4A, on its TOMRA 4A product page. The machine is aimed at growers and storage operators. It is used at harvest, before potatoes go into store, and again for quality sorting when they come out. The product page does not give a launch or delivery date.

How does the three-way sort work?

One stream of potatoes goes in and three come out. Two separate sets of ejection fingers do the work. One set removes dirt, stones, clods and other foreign material. The other picks out out-of-spec potatoes, such as green or rotten tubers, and keeps them apart from the good crop. TOMRA notes that this rejected fraction can still be sold for processing, cattle feed or biogas. Gentler, cushioned ejection fingers are an option.

Inspection uses TOMRA's Pulsed LED+ optics, which look at both sides of each potato, together with infrared detection. Defects are classified by LUCAi, the company's deep-learning software. It comes with pre-trained models and can be trained on the machine to recognize defects specific to a farm. Operators run the sorter from the XCD touchscreen interface used on other TOMRA sorters.

How fast and how accurate is it?

TOMRA rates the 4A at up to 100 tons an hour into storage with one person on the line. Throughput is lower for quality sorting out of storage. Based on its internal testing, the company reports 92% accuracy on foreign material even when 20% of the incoming load is defective. No independent test results are published.

Why is TOMRA pitching it on labor and storage losses?

The product page cites US hired farm wages of USD 19.52 an hour in Apr 2025, up 3% from a year earlier. It also cites a 2024 survey in which 37% of US and Canadian potato growers reported labor shortages in 2023. On storage, TOMRA estimates that rot could put potatoes worth more than USD 2 million at risk in a 10,000-ton store.

Key numbers

FigureValueDateSource
Rated sorting capacity into storage100 tons an hour (as stated by TOMRA)17 Nov 2026Source
Foreign-material sorting accuracy (TOMRA internal testing)92 percent17 Nov 2026Source
Incoming defect load in accuracy test20 percent17 Nov 2026Source
Output streams3 streams17 Nov 2026Source
US and Canadian potato growers reporting labor shortages in 2023 (survey cited by TOMRA)37 percent17 Nov 2026Source

Sources

Background on Potatopedia

Potato Processing Weekly · Every Tuesday

Get this every week

Plant openings, capacity, technology and raw-material supply in fries, chips, flakes and starch, sourced and in one email.

Also get our other newsletters

Free. One email to confirm; one-click unsubscribe. Privacy policy.

Corrections

No corrections to this story.

Seen an error? Tell us; corrections are noted here with their date.

Clearly labelled sponsors. Never paid rankings. Never paid facts. Our editorial standards